SAE J2412 versus SAE J2527
SAE J2412 is a performance based standard for accelerated weathering that uses a Xenon Arc as a light sources to simulate indoor exposure to sunlight on an accelerated basis.
On the other hand, the SAE J2527 is a performance based standard for accelerated weathering that uses a Xenon Arc as a light sources to simulate outdoor exposure to sunlight on an accelerated basis.
Micom offers automotive testing for a wide range of materials, products and sub assemblies. In addition, Micom offers a wide variety of mechanical and physico-chemical material testing to the automotive industry according to various standards ASTM, SAE, MIL-STD, ISTA, ANSI, CSA, BRP, GM & others).
If you require more information about the SAE J2412 test and SAE J2527 test we invite you to contact our material testing laboratory today. It will be our pleasure to talk to your about material testing and review your custom furniture testing requirements.
Micom Laboratories is a third party industrial material testing laboratory accredited by the Standards Council of Canada, CGSB, ISTA and many other organizations.
All of the information and opinions contained in this blog are made with the information, and the understanding that we have reviewed at the time of publishing. However, despite our efforts, we do not offer any guarantee of their accuracy, thoroughness of our investigation or validity. The author of this blog is not liable for any inaccuracies or any losses or damages that may result from the use of the information or data contained herein. This blog has not been reviewed or verified for its accuracy by any peer group associates prior to publication.
My career has been focused on simulating real life in the lab under controlled yet accelerated conditions. My passion for lab testing lead me to start Micom Laboratories Inc. 16 years ago. Through time I made sure Micom has the necessary equipment to simulate various environmental parameters such as the sun, vibrations, heat, cold, thermal shocks and humidity. I wanted to be able to move things back and forth, apply stresses to the products and materials we test and see how they react to the various stimuli. To do so we test products and materials against known standards and specifications (certification) and in many cases by creating my own test protocols and specifications (this is the cherry on top of the sundae…). This is what led me to participate in many standards writing committees and to become chairman of some of these committees.